inline round dripper type drip irrigation pipe machine
Main technical parameter
Specification of final products
Φ12mm, Φ16mm, Φ20mm
Wall thickness of final product
Main driving power
Max. extruding capacity
Filter changing way
Total dripper supply power
Emitter supplying speed
Tractor driving power
Hole drilling way
Hole drilling speed
Dripper transferring system
The Dripper feeding way is automatic feeding and transferring way is belt . The driving motor is 60W , 50 HZ,1350 R/min.
The dripping choosing disc is automatic type , and the rotating disc diameter is Φ540mm and the rotating disk material is high –strength alloy aluminum .
The flat dripper is transferred by pneumatic air , and the length of transferring tank is 2000mm . The driving motor of rotating disk is Delta servo,1.5KW. Driving motor of dripper insertion is also Delta servo,1.0KW.
ZFSJ-70×33/1single screw extruder
The screw Diameter is70mm.The L/D ratio is 33:1. The material for screw is 38CrMoAlA(special alloy steel for screw).
The changing way of filter change device is manual operation. It is durable net which is our patent product . The filter should be changed every 24-48hours.
The number of machine body heating and cooling zones is 4 .
The PE Material feeding way is vacuum absorption way and the drying way is automatic controlling hot wind heating .
The material of Vacuum tank body is high-strength stainless steel model:304. The length of Vacuum water tank is 4meter(standard allocation, length can be ordered).The central height is 1000 mm. The vacuum pump is1.45KW and water pump is 0.5KW*2.
Cooling water tank and Drying tank
The material of Cooling water tank is high-strength stainless steel model:304. The length of water tank Is 4meter*2(standard allocation, length can be ordered). The central height is 1000 mm .The cooling method is immersion .
The drying method is water blowing wind ring. The material of wind ring is high-strength alloy aluminum
High speed tractor
The tractor Clamping type is caterpillar type and the Hauling off speed is ≤45m/min. The Effective length of caterpillar band is 500mm .
Hole drilling system
The Drilling speed is ≤170pcs/min and drilling method is mechanical type .
The winder is two station and rolling length is 500 meters .
The roll changing way is manual . the winding motor is torque motor and power is 2N·m*2.
11. Electricity cabinet
The Temperature control method is Delta temp control module, PLC . and the heating area is 7 areas . water temperature control area is one .
The brand for PLC , TOUCH SCREEN ,FREQUENCY CONVERTOR ,SERVO is DELTA . And the low voltage electrical equipment brand is Schneider .